Overview of GHS (Globally Harmonized System) in Korea and the direction of further development

Many chemicals are being developed with the growth of science technology. Such chemicals bring many advantages to humans but also cause many social problems because of the hazards of the materials. Therefore, it is necessary to have a system which identifies the hazards of chemicals. Some acts or regulations about information on warning labels or MSDS (Material Safety Data Sheet) information for chemicals are similar in each country but there are differences in definitions of degree of hazard, standard classification of harmful level, and indication methods. GHS is the indication method of worldwide integrated classification standard in order to prevent damage caused by disease or risks of accidents resulting from confusion by the users. In keeping pace with the world trend, Korea has conducted translation of the GHS manual from UN and selected it as the official GHS manual of the Korean government. The official Korean GHS translated version was published in July 2005. After that, the Korea Ministry of Employment and Korea Labor and the Ministry of Environment have implemented GHS MSDS for chemical substances since July 1, 2010 so that manufacturers and importers are required to apply it. The full implementation for compound materials will start on July 1, 2013. In Korea, database information for chemicals is provided by four organizations including The Korea Occupational Safety and Health Agency. However, domestic information on chemicals provided by domestic information providers has problems including differences in basic content and incorrect recording because of trade secrets. Efforts for improvement including reinforcing training for manufacturers and importers on recording consistent information for different organizations are urgently needed.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.     

Inactivation of SARS-CoV-2 by Ozonated Glycerol

We evaluated the SARS-CoV-2-inactivation activity of ozonated glycerol (OG). When a viral solution with 1% fetal bovine serum (FBS) was mixed with test solutions at a ratio of 1:19 and incubated for 20 s, OG with ozone concentrations of over 1000 ppm inactivated ≥ 94.38% of the virus. Extension of the reaction time to 1 h led to the inactivation of ≥ 99.82% of the virus (the viral titer was below the detection limit). Extension to 24 h resulted in concentrations over 200 ppm OG inactivating ≥ 99.87% of the virus (the viral titers were below the detection limit). Next, viral solutions with 1, 20, and 40% FBS were mixed with test solutions at a ratio of 1:19 and incubated for 5 min. Whereas the virucidal activity of 500 ppm OG was very limited in the presence of 1% FBS (79.47% inactivation), it increased in the presence of 20 and 40% FBS (95.13 and 97.95% inactivation, respectively; the viral titers were not below the detection limit). Meanwhile, over 1000 ppm OG inactivated ≥ 99.44% of the virus regardless of the FBS concentration (the viral titers were below the detection limit). Extension of the reaction time to 1 h led to 500 ppm OG inactivating ≥ 99.91 and ≥ 99.95% of the virus with 20 and 40% FBS, respectively (the viral titers were below the detection limit). These results suggested that OG might be useful as a virucidal agent against SARS-CoV-2.

     

A study on the obstacle-induced variation of the gas explosion characteristics

A study on the variation of the gas explosion characteristics caused by the built-in obstacles was conducted in enclosed/vented gas explosion vessels. It has been well known that the obstacles in pipes and long ducts would accelerate the flame propagation, and cause the transition from deflagration to detonation. In this study, the explosion characteristics and the flame behavior of vented explosions and constant-volume explosions were investigated. Experiments were carried out in a 270-liter and 36-liter hexahedron vessels filled with LPG–air mixture. The explosion characteristics of the gas mixture were determined by using a strain-responding pressure transducer. The flame behavior was recorded by using a high-speed video camera. The shape and the size of the obstacle, and the gas concentration, were adjusted in the experiments.

It can be seen from the experimental results that, instead of being accelerated, the flame propagation inside the explosion vessel is decelerated by the plate obstacles fixed at the bottom of the vessel. Also, the characteristics of the enclosed explosion are not so affected by the built-in obstacles as those of the vented explosion are. It is believed that the eddy-induced turbulence behind the obstacle decelerates the flame propagation.     

Development of intelligent sorting system realized with the aid of laser-induced breakdown spectroscopy and hybrid preprocessing algorithm-based radial basis function neural networks for recycling black plastic wastes

Plastic recycling has been the key issue for reducing environmental problems and resolving resource depletion. To improve the recovery rate of plastics, the plastic wastes are correctly identified according to their resin type. However, the identification system, which is able to identify black plastics according to not only the type of black plastics but also the grade of resins correctly, has not been introduced. In this paper, laser-induced breakdown spectroscopy, intelligent algorithms and preprocessing algorithms are used to improve the identification of black plastics such as polypropylene, polystyrene (PS), and acrylonitrile butadiene styrene (ABS). The laser-induced breakdown spectroscopy is capable of obtaining the characteristic spectrum regardless of material’s physical state. To extract the new features which are very valuable to improving learning performance, increasing computational efficiency, and building better generalization models from the obtained spectra through laser-induced breakdown spectroscopy, the hybrid preprocessing algorithm, composed of principal component analysis and independent component analysis, is used. In addition, the intelligent algorithm named the extended radial basis function neural networks inheriting the advantages of fuzzy theory and neural networks is used to identify black plastic samples into several categories with respect to their resins. The proposed identification system, composed of three parts such as laser induced breakdown spectroscopy, hybrid preprocessing algorithms, and an efficient intelligent classification algorithm, is able to show the synergy effect on the black plastic identification problem. From several experimental results, it can be seen that the identification system based on laser-induced breakdown spectroscopy and the intelligent algorithm is used for identification of black plastics by resin type.     

Reproductive biology of the common shrimp Crangon crangon (Decapoda: Crangonidae) in the central Irish Sea

Aspects of the reproductive biology of the common shrimp Crangon crangon (L.) were studied in Port Erin Bay, Isle of Man, Irish Sea. Size at sexual maturity was determined from the proportions of ovigerous females and of females with maturing ovaries. The size at which 50% of females are mature is estimated (±95% confidence intervals) as 12.5±0.48 mm carapace length. Based on the proportions of ovigerous females and of mature females, the main breeding season was from January to June. Mean ovarian dry weights indicated two broods (winter and summer), with females bearing winter broods (WB) having higher gonad indices than those with summer broods (SB). WB females with non-eyed eggs and with eyed eggs differed in the regression of ovarian dry weight on carapace length, indicating preparation for laying a second brood. In both broods the moult stages of berried females were related to egg stage. Moulting will occur following the release of the brood. During embryonic development, mean egg length and egg volume were larger in all stages, and the mean dry weight of individual eggs of all stages heavier, in WB than in SB; there was no difference in egg number, however. Consequently, reproductive investment, the proportion of female weight devoted to egg production, was 67% higher in WB (0.20±0.04) than in SB (0.12±0.03). There is a significant effect of egg volume on brood weight, but not on egg number. In both broods, egg number was a negatively allometric function of female body size in non-eyed eggs and an isometric function of female body size in eyed eggs. Brood mortality during incubation was higher in SB (17%) than WB (10%). Differences in the reproductive variables and investment between the two broods of C. crangon are discussed in the light of reproductive strategies and life history.Communicated by J.P. Thorpe, Port Erin     

Horizontal distribution of butyltins in surface sediments from an enclosed bay system, Korea

Tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) compounds were quantitatively determined from surface sediment samples (total 59 stations) covering a whole basin where harbors, shipyards, and aquaculture farms were located. Butyltin compounds were detected from all the stations covering 640 km(2) of an enclosed bay system. TBT concentrations ranged from 4 to 382 ng/g as tin on a dry weight basis, and total butyltin concentrations, from 27 to 1763 ng/g. Horizontal distribution of TBT concentration showed apparent negative gradients from harbors and shipyards, indicating that its contamination was closely related to boating and dry-docking activities. However, TBT concentrations were decreased steeply from source areas. Elevated DBT and MBT levels in creeks imply the possible input of DBT from industrial wastewater. Total butyltin concentrations in sediments are significantly correlated with particulate organic carbon concentration for the subset of stations that are distant from source areas.     

Meteorological effects on the evolution of high ozone episodes in the greater Seoul area

Three high O3 episodes--7 days in 1992 (July 3-July 9), 9 days in 1994 (July 21-July 29), and another 3 days in 1994 (August 22-August 24)--were selected on the basis of morning (7:00 a.m.-10:00 a.m.) average wind direction and speed and daily maximum O3 concentrations in the greater Seoul, Korea, of 1990-1997. To better understand their characteristics and life cycles, surface data from the Seoul Weather Station (SWS) and surface and 850-hPa wind field data covering northeast Asia around the Korean Peninsula were used for the analysis. In the July 1992 episode, westerly winds were most frequent as a result of the influence of a high-pressure system west of the Korean Peninsula behind a trough. In contrast, in the July 1994 episode, easterly winds were most frequent as a result of the effect of a typhoon moving north from the south of Japan. Despite different prevailing wind directions, the peak O3 concentrations for each episode occurred when a sea/land breeze developed in association with weak synoptic forcing. The August 1994 episode, which was selected as being representative of calm conditions, was another typical example in which a well-developed     

Sustainable Water Resources Management in a Conflict Resolution Framework1

Abstract: A decision support system for sustainable water resources management in a water conflict resolution framework is developed to identify and evaluate a range of acceptable alternatives for the Geum River Basin in Korea and to facilitate strategies that will result in sustainable water resource management. Working with stakeholders in a “shared vision modeling” framework, sustainable management strategies are created to illustrate system tradeoffs as well as long‐term system planning. A multi‐criterion decision‐making (MCDM) approach using subjective scales is utilized to evaluate the complex water resource allocation and management tradeoffs between stakeholders and system objectives. The procedures used in this study include the development of a “shared vision model,” a simulated decision‐making support system (as a tool for sustainable water management strategies associated with water conflicts, management options, and planning criteria), and the application of MCDM techniques for evaluating alternatives provided by the model. The research results demonstrate the utility of the sustainable water resource management model in aid of MCDM techniques in facilitating flexibility during initial stages of alternative identification and evaluation in a basin suffering from severe water conflicts.     

Assessment of characteristic distribution of PCDD/Fs and BFRs in sludge generated at municipal and industrial wastewater treatment plants

The presence of polychlorinated dibenzo-p-dioxins and furan (PCDD/Fs) and brominated flame retardants (BFRs) in sludge generated at municipal wastewater treatment plants (MWTPs) and industrial wastewater treatment plants (IWTPs) was investigated. The concentrations of these pollutants were in the following ranges: 5.38-7947 ng kg⁻¹ dw (0.02-49.9 ng WHO-TEQ kg⁻¹ dw) for 17 PCDD/Fs, 17.5-66 761 μg kg⁻¹ dw for 27 polybrominated diphenyl ethers (PBDEs), 1.55-29 604 μg kg⁻¹ dw for hexabromocyclododecanes (HBCDs) (α-, β-, and γ-diastereomers), and 4.01-618 μg kg⁻¹ dw for tetrabromobisphenol A (TBBPA). Generally, the levels of each compound in the sewage-sludge samples were higher than those in the industrial-sludge samples with some exceptions. The characteristic distribution profiles of target compounds were observed for different types of sludge and different sources of wastewater. High-chlorinated PCDD/Fs were dominant in all samples except those from the textile industry. The distribution of the BFRs in industrial-sludge samples varied, whereas that of the BFRs in sewage-sludge samples was consistent. The proportion of penta-BDEs in sewage sludge was higher than that in industrial sludge, even though BDE-209 was the most dominant congener in all the samples. For HBCDs, the distribution of diastereomers (α-, β-, and γ-HBCD) was similar across sludge samples that had the same source of wastewater and treatment processes.